Mitsubishi Electric 4F-FS001-W200 Instruction Manual page 101

8.3.4.4 Display Range Setting Screen
Sets the range for the displayed waveform data from the [Display Range] screen.
No. Item
(1) Vertical axis display
range setting
(2) Horizontal axis
display range setting
(3) Automatically adjust
vertical axis range.
Fig. 8-5 Image of Display Range setting screen
Table 8-16 Display Range setting screen description
Specifies the maximum and minimum values for the Graph 1 horizontal axis.
If adjusting the Graph 2 display range, select the "Adjust Graph 2" check box.
By pressing the [Reset] button, the horizontal axis maximum and minimum
values return to their default settings.
Specifies the maximum and minimum values for the Graph 1 vertical axis. If
adjusting the Graph 2 display range, select the "Adjust Graph 2" check box.
By pressing the [Reset] button, the vertical axis maximum and minimum
values return to their default settings
When selected, the vertical axis display range is automatically adjusted.
8 Using the Force Sense Function (Programming)
Description
Force Sense log 8-89