FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF
Class 1 Laser Product
Any service to this product must be carried out by Extron Electronics and its qualified
service personnel.
CAUTION: Using controls, making adjustments, or performing procedures in a manner
NOTE: For more information on safety guidelines, regulatory compliances,
Produit laser de classe 1
Si ce produit a besoin d'un quelconque entretient, celui-ci doit être fait par
Extron Electronics et son personnel qualifié.
ATTENTION : L'utilisation de commandes, la réalisation de réglages, ou l'exécution de
Remarque :
compatibility, accessibility, and related topics, see the
Regulatory Compliance
other than what is specified herein may result in hazardous radiation exposure.
EMI/EMF compatibility, accessibility, and related topics, see the
Regulatory Compliance
Guide" on the Extron website.
procédures de manière contraire aux dispositions établies dans le présent document,
présente un risque d'exposition dangereuse aux radiations.
Pour plus d'informations sur les directives de sécurité, les conformités
de régulation, la compatibilité EMI/EMF, l'accessibilité, et les sujets en lien, consultez le
« Informations de sécurité et de conformité
Guide" on the Extron website
Extron » sur le site internet d'Extron.
"Extron Safety and
"Extron Safety and
Need help?
Do you have a question about the FOXBOX Tx VGA MM and is the answer not in the manual?
Questions and answers