Replacing the Brake Roller
Replace the brake roller in following procedure.
1
Turn off the scanner, unplug the power cable and wait for at least 15 minutes.
For details, refer to
2
Remove all documents from the stacker.
3
If the hopper has been raised, bring it back down to the lower position.
For details, refer to
4
Open the ADF.
For details, refer to
CAUTION
How to Turn the Power OFF (page
Setting the Loading Capacity of the Hopper (page
How to Open the ADF (page
When the ADF is open, it might close accidentally. Be careful not to get your fingers
caught.
21).
31).
26).
147
Replacing the Consumables