Images Turn Out Elongated - Fujitsu fi-7800 Operator's Manual

Images Turn Out Elongated

Check the following points
● Are the rollers clean? (page 188)
● Do the documents meet the paper requirements? (page 188)
● Are the pick rollers, separator roller and brake roller worn out? (page 188)
Have you adjusted the magnification level? (page 188)
●
If the problem persists, check the items in
first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List or the Contact for Inquiries section in Safety Precautions bundled with this
product and make an inquiry.
●
Are the rollers clean?
Solution
Clean the rollers.
For details, refer to
●
Do the documents meet the paper requirements?
Solution
Use documents that meet the requirements.
For details, refer to
●
Are the pick rollers, separator roller and brake roller worn out?
Solution
Use one of the following methods to check the pick roller, separator roller, and brake roller counters, and
replace the pick rollers, separator roller, and brake roller if necessary.
● You can select [23: Show/Clear Counters] from [Main Menu] on the operator panel to check the number
of sheets that have been scanned.
For details, refer to
● You can start up the Software Operation Panel to check the number of sheets that have been scanned.
For details, refer to
For details about replacing the pick rollers, separator roller, and brake roller, refer to
Roller (page 139),
●
Have you adjusted the magnification level?
Solution
In [Hardware Setting] of the Software Operation Panel, adjust the scan scale in the feeding direction.
For details, refer to
Adjustment] (page
Before You Contact the Scanner Service Provider (page 190)
Daily Care (page 115).
Documents for Scanning (page
Checking and Resetting the Counters (page
Checking the Sheet Counters (page
Replacing the Separator Roller (page
Adjusting the Starting Position for Scanning [Offset Setting/Vertical magnification
223).
188
58).
83).
216).
142), and Replacing the Brake Roller (page
Troubleshooting
Replacing the Pick
147).