Pick Roller Error - Fujitsu fi-7800 Operator's Manual

Refer to Daily Care (page 115)
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List or the Contact for Inquiries section in Safety
Precautions bundled with this product and make an inquiry.

Pick Roller Error

When a pick roller error occurs, the following error code appears on the LCD of the scanner's operator panel.
J9:61 Pick Roller Error
Take the following measures.
● Pull down the Pick Roller Unit to its correct position.
● Remove excess documents from the hopper.
● Refer to Adjusting the Paper Separation Force (page 37)
● Refer to Daily Care (page 115)
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List or the Contact for Inquiries section in Safety
Precautions bundled with this product and make an inquiry.
to clean the sensors.
to clean the rollers and sensors.
169
to lower the height of the hopper.
Troubleshooting