Indications On Lcd - Fujitsu fi-7800 Operator's Manual

How to Use the Operator Panel

Indications on LCD

Display Description
Processing initialization.
Ready to start scanning.
Indicates that the initialization was successfully
completed.
For more details about the indicators, refer to About
the Indicators (page 78).
An item from the menu can be selected.
When you press the [Menu] button in the [Ready]
screen, the [Main Menu] screen is displayed.
The Main Menu can be used to configure various
operational settings upon scanning.
For details about the Main Menu screen, refer to How
to Use the Main Menu (page 80).
A function can be selected.
When you press the [Function/Enter] button in the
[Ready] screen, [Function Selection] is displayed.
By using Function Selection, you can configure an
application to be launched when the [Send to] button
is pressed.
For details about the Function Selection screen, refer
to How to Use Function Selection (page 96).
Indicates that a recoverable error occurred during
scanning.
Error codes beginning with the letter "J" or "U" are
displayed.
For details about errors, refer to Errors (page 156).
You can clear the error display by pressing the [Clear/
Back] or the [Stop] button.
Note that if the error is "Paper jam", the message
disappears after a certain amount of time elapses
with no documents ([Ready] status) in the scanner.
76