Setting The Control For Ejecting Documents [Stacking Control] - Fujitsu fi-7800 Operator's Manual

Setting the Control for Ejecting Documents [Stacking Control]

Set the control for ejecting documents when scanning documents with a document length of 138 mm or shorter.
Select [Stackability Emphasis] when you want to stack the ejected documents neatly, and select [Speed Emphasis]
when you want to speed up the scanning speed.
1
Start up the Software Operation Panel.
Refer to Starting Up the Software Operation Panel (page
2
From the list on the left, select [Device Setting 2] → [Stacking Control].
3
Specify the Stacking Control.
Stackability Emphasis
Stacks up the ejected documents neatly.
However, the scanning speed slows down with this setting.
Normal
When [Normal] is selected, the scanning speed is faster than when [Stackability Emphasis] is selected.
When [Normal] is selected, the ejected documents are stacked more neatly than when [Speed
Emphasis] is selected.
Speed Emphasis
The scanning speed becomes fast with this setting.
However, the ejected documents are not stacked neatly.
193).
250
Operational Settings