Fujitsu fi-7800 Operator's Manual page 213

Item Description
When [Forcibly select Front-
Side Imprinter] or [Forcibly
select Back-Side Imprinter] is
selected, priority is given to
the Software Operation Panel
settings.
Timeout for manual Specify the waiting time to
feeding cancel manual feeding.
It can also be configured from
the operator panel.
Paper Protection Specify whether to enable or
disable Paper Protection.
Enabling this setting reduces
the risk of having your
documents damaged in such
ways, by stopping the scan
when the scanner detects a
document that is unusually
warped.
Paper Protection is disabled in
Manual Feed mode.
It can also be configured from
the scanner driver's setup
dialog box or the operator
panel. Note that priority is
given to the scanner driver
setting unless you have
prioritized the operator panel
setting.
Paper Protection Sensitivity Setting: you can
Sensitivity specify the sensitivity to detect
an abnormal feeding of
documents when Paper
Protection is enabled.
It can also be configured from
the operator panel. Note that
you can prioritize the operator
panel setting.
Detection Range: you can
specify the range to detect an
abnormal feeding of
Setting/Value
5, 10, 20, 30, 40, 50, 60, 70,
80, 90, 100, 110, 120, 180,
240, 300, 360, 420, 480, 540,
600, 900, 1200, 1500, 1800,
1999 (seconds)
Enable / Disable
Low / Normal / High
Normal / Large
213
Operational Settings
Factory Default
10 seconds
Disable
Normal
Normal