Fujitsu fi-7800 Operator's Manual page 136

4
Close the hopper/ADF/top cover.
For information on how to close the hopper, refer to
For information on how to close the ADF, refer to
For information on how to close the top cover, refer to
Be careful not to get your fingers caught when closing the ADF/top cover.
CAUTION
ATTENTION
Confirm that the ADF is closed properly. Otherwise, documents may not be fed into the ADF.
5
Press the [Stop] button.
Cleaning is completed.
6
Reset the cleaning counter.
Use one of the following methods to reset the counter.
● Select [23: Show/Clear Counters] from [Main Menu] on the operator panel, then reset the counter.
For details, refer to Checking and Resetting the Counters (page
● Start up the Software Operation Panel and reset the counter.
For details, refer to Resetting the Sheet Counters (page
How to Close the Hopper (page
How to Close the ADF (page
How to Close the Top Cover (page
83).
218).
136
Daily Care
24).
28).
30).