Fujitsu fi-7800 Operator's Manual page 109

● Scan Button (When the [Scan/Pause] button is pressed)
● [Send to 01] to [Send to 50] (when the [Send to] button is pressed)
6
Select an application to be launched by the [Send to] or [Scan] button event and an operation to be
performed.
Click [Start this program] under [Actions], and select an application from the menu shown on the right.
7
Click the [OK] button.
This completes the computer settings. Proceed to configure the scanner settings.
HINT
● The windows that appear and the operations differ depending on the operating system that you are
using.
● To set multiple buttons, repeat steps 5 to 6.
109
Various Ways to Scan