HINT
In Continuous Feed mode, documents are scanned one by one even if multiple sheets are mistakenly fed.
6
Repeat step
5
until all documents are scanned.
HINT
● Scanning can be stopped immediately by pressing the [Counter Reset] button on the operator panel.
● Scanning stops when no document is loaded on the hopper after the time specified in the Software
Operation Panel.
● The scanner waits for the period of manual feed timeout even when there is no document left on the
hopper.
● The timeout period for manual feeding can be configured on the operator panel or in the Software
Operation Panel.
● Continuous Feed mode can be cleared in [10: Hopper Level] of the [Main Menu] on the operator panel.
The hopper is set to [4: Lower] when you clear manual feeding (continuous).
For details, refer to
Items Configurable in the Main Menu (page
89).
107
Various Ways to Scan