urmet domus 1061/004 Installation And Programming Manual page 44

FOLLOW THE NOTES BELOW FOR INSTALLATION AND PROGRAMMING PROCEDURE COMPLIANT WITH CEI 79.2 REGULATIONS
AND REQUIREMENTS OF IMQ MARK - SECURITY SYSTEMS
• In.order.to.ensure.IMQ-SECURITY.SYSTEM.standards,.KEY.READERS.and.EnVIROnMEnTAL.LISTEnInG.module.1061/013.installed.
outdoor.must.be.housed.in.self-protected.enclosures...
• TELEPHOnE.LInE.COnTROL.disabling.is.not.allowed.in.IMQ.standards..
• Concerning.telephone.section,.only.one.telephone.number.must.be.associated.to.each.event...
• AUTO-EXCLUSIOn.OF.InPUTS.that.are.OPEn.DURInG.SYSTEM.ARMInG.is.not.allowed.in.IMQ.standards..
• The.use.of.KEYPAD.ADDITIOnAL.InPUTS.is.not.compliant.with.the.IMQ.standard..
• Before.the.control.panel,.install.a.multi-pole.circuit.breaker...
• Remember that for compliance with IMQ Security Systems (CEI EN-60950 standards), the battery housing installed inside the control
panel must have UL 94 HB flammability rating or greater..
The.following.functions.ARE.nOT.IMQ-SECURITY.SYSTEMS.CERTIFIED:
• TECHnOLOGICAL.
• RESCUE.
• REMOTE.MAnAGEMEnT.
• TECHnICAL.ASSISTAnCE.
• REMOTE.SURVEILLAnCE
DS 1061-015B
URMET.S.p.A.
10154 TORINO (ITALY)
VIA.BOLOGnA.188/C
Telef. +39 011.24.00.000 (RIC. AUT.)
Fax. . +39.011.4.00.300.-.33
IMQ STANDARD - SECURITY SYSTEM - 1ST LEVEL
LBT 8402
Area.tecnica
servizio.clienti. +39.011.3.39.810
http://www.urmetdomus.com
e-mail: info@urmetdomus.it
Designed.by.Urmet
Made.in.P.R.C.