the system is activated/deactivated (also partially). If the test is unsuccessful, no tamper alarm is generated.
•
Enabled with SAG alarm, enables the automatic test for telephone line check (failure or no line). The test is performed each time the
system is armed/disarmed (also partially). If the test is unsuccessful, is generated not only the failure signalling, but also the tamper
alarm..
•
Phone numbers:
•
Phone number,.is.the.telephone.number.to.be.used..The.number.can.be.composed.by.1.digits.max..
•
Call type, used to indicate if the alarm message must be sent only as vocal message (Voice), as vocal and SMS (Voice + SMS) or
numeric, if addressed to an alarm reception centre (IDP, ADF or SIA, according to the protocol used by the alarm reception centre).
SMS.messages.will.be.sent.only.if.the.GSM.module.is.present.and.has.priority,.and.numeric.calls.to.alarm.reception.centres.only.if.the.
PSTn.module.is.present.and.has.priority..
•
As.last.step,.select.the.alarm.events.associated.to.the.telephone.number,.that.will.generate.the.alarm.message.sending..
.
34
DS1061-015B