Table of Contents
Advertisement
5.4.8 CODES PROGRAMMING MENU
OK
Main programming menu
ESC
To acquire a new code, follow the instructions below:
•
Press.OK.button.on.motherboard..
•
Enter on the keypad a numeric code from 4 to 6 digits an confirm by pressing OK.button.on.the.keypad.
•
In case of successful acquisition, the control panel LCD display blinks to confirm and a double acoustic signal is emitted (beep beep) both in
control panel and in keypads. The shown number is the code identifier.
The control panel can acquire up to 10 codes.
5.4.9 KEYS / PARTITIONS ASSOCIATION MENU
OK
Main programming menu
ESC
When a key is acquired, it is automatically associated to all the partitions and so it is necessary to disassociate it from the partitions where it must
not.be.active..If.needed,.the.key.can.be.associated.again.to.those.partitions.afterwards.
To disable a key, it is sufficient to disassociate it from ALL the partitions.
5.4.10 CODES / PARTITIONS ASSOCIATION MENU
OK
Main programming menu
ESC
When a code is acquired, it is automatically associated to all the partitions and so it is necessary to disassociate it from the partitions where it
must.not.be.active..If.needed,.the.code.can.be.associated.again.to.those.partitions.afterwards.
.
To disable a code, it is sufficient to it from ALL the partitions.
6
OK
ESC
Master
Code
acquisition
User
For deleting, keep OK button
pressed for 2 seconds: the
LCD display blinks for 3 times
and all the keys are deleted.
If the control panel has not
OK
Master codes stored, the
display shows
Codes
and it is not possible to exit
deleting
by pressing ESC button until
a new Master key is acquired.
OK
ESC
Key
1
...
Key
10
OK
ESC
Code 1
...
Code 10
OK
...
OK
The control panel
automatically shows the first
ESC
free memory location
(01 - 02 – 03 ...) for
acquisition of Master or
User code.
OK
...
OK
ESC
blinking
When the OK button is
OK
Partition A
pressed to associate or
disassociate the key (toggle
selection), the LCD display
blinks for 3 times. The dot
down on the right disappears
OK
Partition
B
if the key is disassociated,
appears again if the key is
associated.
OK
Partition
C
The partition D is available in
OK
Partition
D
1061/006 control panel only.
When the OK button is
OK
Partition A
pressed to associate or
disassociate the key (toggle
selection), the LCD display
blinks for 3 times. The dot
OK
Partition B
down on the right disappears
if the code is disassociated,
appears again if the code is
associated.
OK
Partition C
The partition D is available in
OK
Partition D
1061/006 control panel only.
DS1061-015B
Hide quick links:
Advertisement
Table of Contents
