Final Operations; Completion; Electronic.key/Proximity.readers.closing; Keypads.closing - urmet domus 1061/004 Installation And Programming Manual

6. FINAL OPERATIONS

6.1 COMPLETION

6.1.1 ELECTRONIC KEY/PROXIMITY READERS CLOSING
Install the electronic key/proximity reader in the suitable support. Fix the support to the flush or wall mounting box and put plates, if necessary.
6.1.2 KEYPADS CLOSING
Screw the keypad support on the flush or wall mounting box. Put the provided Simon Urmet Nea plate on the support, taking care to close the
front.tamper.by.pressing.it.down..
6.1.3 CONTROL PANEL CLOSING
Close again the control panel with its lid and fix it with the two flush mount fixing screws. After closing the control panel tamper, the system exits
from.the.maintenance.phase..

6.2 TEST

At.the.end.of.installation.and.programming.operations,.perform.the.system.test..In.particular,.it.is.necessary.to.verify.if:
• The.programmed.keys.activate.and.deactivate.the.intrusion.partitions.for.which.they.are.enabled.
• The.programmed.codes.activate.and.deactivate.the.intrusion.partitions.for.which.they.are.enabled..
• The.sensors.detect.intrusion.attempts..
• Sirens.and.other.programmed.outputs.are.activated.in.case.of.an.alarm..
• The.telephone.communicators,.if.installed,.send.the.programmed.alarm.calls..
DS1061-015B
35