urmet domus 1061/004 Installation And Programming Manual page 32

.. On.the.display.appears.Settings: Input Lines/Outputs/Times that allows to configure system inputs, outputs and times.
The following parameters are configurable:
• Input lines:
• Description, field where it is possible to enter an alphanumeric text used to identify more easily the input. Good descriptions could be:
"Entrance door", "Child room", "Garage", "Accounting department", " Workshop", etc.
• Configuration, that allows to configure the input. For their meaning, see paragraph 5.4.3 Inputs programming menu. If "Rolling shutter"
is selected as configuration, also the Sensitivity field is enabled.
• Partitions,.where.it.is.possible.to.associate/disassociate.the.input.to.the.partitions.
• Areas,.where.it.is.possible.to.associate/disassociate.the.relay.outputs.to.the.events..For.their.meaning,.see.paragraph.5.4.4.Outputs.
programming.menu.
• Times,.where.it.is.possible.to.set.the.different.timings.used.by.the.system..For.their.meaning,.see.paragraph.5.4.6.Times.programming.
menu.
3.. Press.the.button.Codes/Keys..Appears.the.display.Codes and Key, that allows to configure keypad codes and electronic or transponder
keys..
The following parameters are configurable:
• Codes:.
Zone Association,.where.it.is.possible.to.select.partitions.which.can.be.activated.or.deactivated.by.the.code..
• Keys:
Zone Association,.where.it.is.possible.to.select.partitions.which.can.be.activated.or.deactivated.by.the.key.
3
DS1061-015B