Declaration of Incorporation
20
Declaration of Incorporation
For pumps without explosion protec‐
tion:
Tab. 21: Extract from the Declaration of Incorporation
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied,
in particular:
Only start up the pump when it has been established that the machine into which the pump has been
installed complies with the provisions of the Machine Directive.
Date:
94
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL, Appendix I, BASIC
HEALTH AND SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
DE - 69123 Heidelberg, Germany,
n
hereby declare that the product specified below complies with the
relevant basic health and safety requirements of the Directive, on
the basis of its functional concept and design and in the version
distributed by us. Technical documents were produced in line with
Appendix VII Part B.
Any modification to the product not approved by us invalidates this
declaration.
Metering pump without motor, product range Makro TZ
TZMb_ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0_ _ _
TZHa_ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0_ _ _
TZKa_ _ _ _ _ _ _ _ _ _ _ _ _ _ § 0_ _ _
with the characteristics
§ = "4" or "7" or "8" or "9" or "0"
see nameplate on the device
Machinery Directive (2006/42/EC)
The protection targets of the Low Voltage Directive 2014/35/EU were
complied with according to Appendix I, No. 1.5.1 of the Machinery Direc‐
tive 2006/42/EC
RoHS Directive (2011/65/EU)
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
EN 50581:2012
22.07.2019
You can download the Declaration of Incorporation at www.promi‐
nent.com.