F31 Orientation Correction Function - SMC Networks PFMC7501 Operation Manual

■[F31] Orientation correction function
This function can correct a display error of flow caused by the mounting orientation.
If the product is mounted vertically, the displayed flow rate will be seriously affected around a zero flow rate
and when the fluid pressure is high. This function can be used to reduce the display error that occurs when
the product is mounted vertically.
<Operation>
Press the or
[PoS] and [the current set value] are displayed in turn on the sub display.
Orientation
[PoS] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the or
Supply pressure
[PrS] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the or
[F31] Setting of the orientation correction function completed.
button in function selection mode to display [F31] on the main display.
button to select.
button to select.
Return to function selection mode.
Press the button.
Press the button to set.
Press the button to set.
-50-
No.PF※※-OMS0002-B