■[F90] Setting of all functions
All functions can be set one after the other, without having to select each one separately in function
selection mode.
<Operation>
Press the
or
[ALL] is displayed on the sub display.
Setting of all functions
[ALL] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
Select [oFF].
Press the
button to set.
button in function selection mode to display [F90] on the main display.
button to select.
Refer to "Order of function settings" (next page).
Press the
Each time the
steps in the order shown in the following table.
Follow the specified procedure for each function.
: Press the
measurement mode.
[F90] Setting of all functions completed.
Return to function selection mode.
Press the
button.
Select [oN].
Press the
or
button to select.
button is pressed, the function
button for 2 seconds or longer to return to
-54-
button to set.
No.PF※※-OMS0002-B