Table of Contents
Advertisement
d. When accumulated pulse output mode is selected
Display colour
The display colour (main display) can be set to change depending upon the
status of OUT1.
[CoL] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
: When the accumulated pulse output mode is selected, the output operation indicator LED will turn off.
: When the flow rate is less than the rated flow range, the accumulated pulse output will not operate.
: When the flow exceeds the maximum display range, the accumulated pulse output will be equivalent to the maximum display value.
button to select.
[F 1] Setting of OUT1 completed.
Return to function selection mode.
Press the
button to set.
-36-
No.PF※※-OMS0002-B
Advertisement
Table of Contents
