Table of Contents
Advertisement
c. When accumulated output mode is selected
The accumulated output can be set between 0 and 999999999 L.
The set value is input starting from the upper 3 digits.
Selection of accumulated output increment (addition) and decrement (subtraction) relies on the setting of
OUT1, so it is not available for OUT2.
Set value (upper 3 digits)
[P2AH] or [n2AH] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
Press the
button to move on to input the next digit.
Press the
button for 1 second or longer to stop flashing.
Set value (lower 6 digits)
[P2AL] or [n2Al] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
Press the
button to move on to input the next digit.
Press the
button for 1 second or longer to stop flashing.
button to change the value.
button to change the value.
[F 2] Setting of OUT2 completed.
Return to function selection mode.
Press the
button to set.
Press the
button to set.
-40-
No.PF※※-OMS0002-B
Advertisement
Table of Contents
