Table of Contents
Advertisement
a. When hysteresis mode is selected
Set value
[P_2] or [n_2] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
Hysteresis
[H_2] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
: The above example is for the 500 L/min type.
: The set value and hysteresis settings limit each other.
: The display colour is defined by OUT1 and cannot be changed with any OUT2 settings.
button to change the value.
button to change the value.
[F 2] Setting of OUT2 completed.
Return to function selection mode.
Press the
button to set.
Press the
button to set.
-38-
No.PF※※-OMS0002-B
Advertisement
Table of Contents
