a. When hysteresis mode is selected
Set value
[P_1] or [n_1] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
Hysteresis
[H_1] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
Display colour
The display colour can be set to change depending upon the status of OUT1.
[CoL] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the
or
: The above example is for the 500 L/min type.
: The set value and hysteresis settings limit each other.
button to change the value.
button to change the value.
button to select.
[F 1] Setting of OUT1 completed.
Return to function selection mode.
Press the
button to set.
Press the
button to set.
Press the
button to set.
-32-
No.PF※※-OMS0002-B