SMC Networks PFMC7501 Operation Manual page 40

b. When window comparator mode is selected
Set value (Lower limit value)
[P2L] or [n2L] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the or
Set value (Upper limit value)
[P2H] or [n2H] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the or
Hysteresis
[H2] is displayed on the main display.
[The current set value] flashes on the sub display.
Press the or
: The above example is for the 500 L/min type.
: The set value and hysteresis settings limit each other.
: The display colour is defined by OUT1 and cannot be changed with any OUT2 settings.
button to change the value.
button to change the value.
button to change the value.
[F 2] Setting of OUT2 completed.
Return to function selection mode.
Press the button to set.
Press the button to set.
Press the button to set.
-39-
No.PF※※-OMS0002-B