Table of Contents
Advertisement
Summary of Product parts
Body
Name
Display
Connector
Lead wire with M8 connector
Piping port
Body
: A protective tape is affixed to the display. Please remove it before use.
Display
Name
Main display
Indicator LED
Sub display
button (UP)
button (SET)
button (DOWN)
Units indicator
See below.
M8 connector for electrical connections.
Lead wire for power supply and outputs.
For piping connections. Connected to the fluid inlet at IN and to the fluid outlet at OUT.
The body of the product.
Displays the flow value, setting mode and error codes. (2 colour display)
Displays the output status of OUT1 and OUT2.
LED is ON (Orange) when the output is ON.
When the accumulated pulse output mode is selected, the output display will turn OFF.
Displays the accumulated flow, set value, peak/bottom value and line names when in
the measurement mode. (1 colour display)
Selects the mode and the display shown on the Sub display, or increases the ON/OFF
set value.
Press this button to change the mode and to set a value.
Selects the mode and the display shown on the Sub display, or decreases the ON/OFF
set value.
Indicates the unit currently selected.
-11-
Connector pin numbers
(on the product)
1
DC(+)
OUT2/
2
Analogue output/
External input
3
DC(-)
4
OUT1
Description
Description
No.PF※※-OMS0002-B
Advertisement
Table of Contents
