Table of Contents
Advertisement
<Operation>
1. Press the
button once in measurement mode.
[P_1] or [n_1] and [the current set value] are displayed in turn.
2. Press the
or
The
button is to increase and the
3. Press the
button to complete the setting.
Return to measurement mode.
: The above example is for the 500 L/min type.
: For models with switch outputs for both OUT1 and OUT2, [P_2] or [n_2] will be displayed too. Set as above.
: For input of hysteresis, perform the settings referring to [F 1] Setting of OUT1 (page
: When a mode other than hysteresis mode is selected, "Set value" of page
: Note that the set value and hysteresis are limited by each other.
: For more detailed settings, set each function in function selection mode (page 25).
button to change the set value.
button is to decrease the set value.
-24-
Press the
button continuously
to keep increasing the set value.
Press the
button continuously
to keep decreasing the set value.
29
to) and [F 2] Setting of OUT2 (page
30
is displayed.
37
to).
No.PF※※-OMS0002-B
Advertisement
Table of Contents
