Table of Contents
Advertisement
Change of security code
In the default setting, the security code is set to [000], but this can be changed to any number.
<Operation>
1. When the key lock has been set, perform the key unlocking procedure (step 4).
2. After the display changes to [UNLoC], press and hold the
seconds or longer.
A new security code can now be entered.
3. Enter a new security code.
The first digit will start flashing. Press the
Press the
button to set, and the next digit to the right will start flashing.
If the
button is pressed at the last digit, the first digit will start flashing.
4. After the setting is completed, press and hold the
The sub display will stop flashing, and the new security code will be displayed.
At this time, if the
of security code must be repeated.
5. After checking the security code is as required, press the
The new security code is set and return to measurement mode.
or
or
buttons are pressed, any security code changes are lost, and the change
-61-
and
buttons simultaneously for 5
button to select a value.
button for 1 second or longer.
button for 1 second or longer.
No.PF※※-OMS0002-B
Advertisement
Table of Contents
