<Example of sub display during measurement mode (continued)>
The maximum (peak) and minimum (bottom) flow from when the power is supplied to this moment is detected
and updated.
Press the
and
buttons for 1 second reset the peak and bottom values.
If the external input is available, the values can also be reset by external input.
(Refer to [F20] External input on page 47.)
The name of the piping line where the product is installed can be displayed.
(Refer to [F82] Line name on page 53.)
The sub display can be turned off.
-46-
No.PF※※-OMS0002-B