9
COMPLIANCE WITH EACH REGION
9
9.1
Compliance with CE marking
CE marking
The CE marking is mandatory and must be affixed to specific products placed on the European Union. When a product
conforms to the requirements, the CE marking must be affixed to the product. CE marking also incorporates the machines and
equipments that are for sale with the servo motors in the European Union area.
Each manual is available in different languages. For details, refer to our website or contact our local sales office.
EMC directive
The EMC directive also applies to the direct drive motor as a single unit. Therefore, the direct drive motor is designed to
comply with the EMC directive. In addition, the EMC directive also incorporates the machines and equipments of the direct
drive motor. TM-RFM, TM-RG2M, and TM-RU2M series comply with Category 3 in accordance with EN61800-3. These series
are not intended to be used on a low-voltage public network which supplies domestic premises; When used on such network,
radio frequency interference may occur. The installer must provide a guide for installation and use, including the
recommended mitigation devices.
Low voltage directive
The low voltage directive also applies to the direct drive motor as a single unit. The direct drive motor is designed to comply
with the low voltage directive.
Machinery directive
The direct drive motor as a single unit falls under Article 1.2 (k), and therefore not subject to the Machinery directive. However,
the Machinery directive also applies to machines and equipment that incorporate the direct drive motor. Please check if the
machines and equipment as a whole are in conformity.
For compliance
Be sure to perform an appearance inspection of every unit before installation. In addition, have a final performance inspection
on the entire machine, and keep the inspection record.
Wiring
Use EN compliant products for the power supply wiring of direct drive motor. Products in compliance with EN are available as
options. Refer to the following for details of the options.
Page 24 Wiring option
EMC tests
The EMC test of the incorporating machines and devices of the servo amplifiers and direct drive motors must attain the
electromagnetic compatibility (immunity / emission) standards, and satisfy the environment and electrical equipment
specifications to be used.
For EMC directives handling method for servo amplifiers and direct drive motors, refer to the "EMC installation guidelines".
9 COMPLIANCE WITH EACH REGION
55
9.1 Compliance with CE marking