Mitsubishi Electric MELSERVO-J5 TM-RG2M Series User Manual page 17

Plug Cable clamp
Connector Feature Plug (DDK)
configuration
Type
C IP67 Straight
EN
compliant
General
environment
*1
*1 Not comply with EN.
*2 The connector to be mated.
Plug Cable clamp
Connector Feature Plug (DDK)
configuration
Type
D IP67 Straight
EN
compliant
General
environment
*1
*1 Not comply with EN.
*2 The connector to be mated.
Plug Cord clamp
Connector Feature Plug (Hirose Electric)
configuration
Type
E IP67 Straight
*1 The connector to be mated.
*2 Supplier: Toa Electric Industrial
Model
CE05-6A18-10SD-D-BSS
Applicable wire size: AWG 14 to 12
D/MS3106B18-10S
Applicable wire size: AWG 14 to 12
Model
CE05-6A22-22SD-D-BSS
Applicable wire size: AWG 10 to 8
D/MS3106B22-22S
Applicable wire size: AWG 10 to 8
Plug Cord clamp
RM15WTPZ-12P(72) JR13WCCA-8(72)
3 CONNECTORS USED FOR DIRECT DRIVE MOTOR WIRING
Cable clamp (DDK)
Cable OD [mm] Model
(reference)
8.5 to 11 CE3057-10A-2-D
10.5 to 14.1 CE3057-10A-1-D
14.3 or less D/MS3057-10A
(Bushing ID)
Cable clamp (DDK)
Cable OD [mm] Model
(reference)
9.5 to 13 CE3057-12A-2-D
12.5 to 16 CE3057-12A-1-D
15.9 or less D/MS3057-12A
(Bushing ID)
Recommended cable (Bando
Densen)
Model Cable OD
[mm]
(reference)
20276 8.2
VSVPAWG#23×6P
*2
KB-0492
3.2 Wiring connectors (connector configurations A/B/C/D/E)
Direct drive motor
power supply
*2
connector
3
CE05-2A18-10PD-D
Direct drive motor
power supply
*2
connector
CE05-2A22-22PD-D
Absolute position
storage unit
connector (encoder
*1
side)
RM15WTRZB-12S(72)
15