Wiring Connectors (Connector Configurations A/B/C/D/E) - Mitsubishi Electric MELSERVO-J5 TM-RG2M Series User Manual

3.2
Wiring connectors (connector configurations A/B/
C/D/E)
Plug Cord clamp
Connector Feature
configuration
A IP67
*1 The connector to be mated.
*2 Supplier: Toa Electric Industrial
Cable clamp
Plug
Connector Feature
configuration
B IP67
EN
compliant
General
environment
*1
*1 Not comply with EN.
*2 The connector to be mated.
3 CONNECTORS USED FOR DIRECT DRIVE MOTOR WIRING
14

3.2 Wiring connectors (connector configurations A/B/C/D/E)

Plug (Hirose Electric)
Type Plug Cord clamp
Straight RM15WTPZK-12S JR13WCCA-8(72)
Plug (DDK)
Type Model
Straight CE05-6A14S-2SD-D
Applicable wire size: AWG 22 to 16
D/MS3106B14S-2S
Applicable wire size: AWG 22 to 16
Recommended cable (Bando
Densen)
Model Cable OD
[mm]
(reference)
20276 8.2
VSVPAWG#23×6P
*2
KB-0492
Cable clamp
Cable OD [mm] Model
(reference)
4 to 8 ACS-08RL-MS14F
(Nippon Flex)
8 to 12 ACS-12RL-MS14F
(Nippon Flex)
5 to 8.3 YSO14-5 to 8
(Daiwa Dengyo)
8.3 to 11.3 YSO14-9 to 11
(Daiwa Dengyo)
7.9 or less D/MS3057-6A
(Bushing ID)
Direct drive motor
encoder connector or
absolute position
storage unit
connector (servo
*1
amplifier side)
RM15WTRZB-12P(72)
Direct drive motor
power supply
*2
connector
CE05-2A14S-2PD-D