Chapter 6 Wiring Option; Connector Set - Mitsubishi Electric MELSERVO-J5 TM-RG2M Series User Manual

6
Wiring option
Precautions
• To prevent malfunction and a fire, use the specified peripheral equipment and options.
• To prevent an electric shock, fire, or injury, correctly wire options and peripheral equipment, etc. in the correct combination.
• We recommend using HIV wires to wire the servo amplifiers, direct drive motors, options, and peripheral equipment.
Therefore, the recommended wire sizes may differ from those of the used wires for the previous direct drive motors.
6.1

Connector set

For the connectors used with this direct drive motor, please purchase the options indicated in this section.
When fabricating an encoder cable, refer to the following.
Page 58 Fabrication of the encoder cable
Precautions
• The IP rating indicated is the connector's protection against ingress of dust and water when the connector is connected to a
servo amplifier, direct drive motor, or absolute position storage unit. If the IP rating of the connector, servo amplifier, direct
drive motor, and absolute position storage unit varies, the overall IP rating depends on the lowest IP rating of all
components.
6 Wiring option
24
6.1 Connector set