Malaguti XTM 50 2007 Manual page 139

INSTRUMENT AND CONTROL FUNCTION
SUB-MENU FUNCTIONS
FUNCTIONS OF THE BAR GRAPH
To select one of the bar graph functions,
open the main STAND-BY menu. When "- -
- - -" appears on the display, press the
MODE button within 3". The bar graph will
switch from engine speed (RPM) to battery
3
charge level (V-batt) and finally to coolant
temperature (Temp H O). The function is stored after 3 seconds.
2
BATTERY CHARGE LEVEL
This check should be made with the engine
off; if battery power drops to MIN., the
symbol will flicker, irrespective of the func-
tion displayed.
When the battery charge level drops to its
minimum threshold, the battery level func-
tion is automatically activated, irrespective of the function selected,
and the last dash of the bar graph will flash. If you change function,
the battery logo will remain displayed until the correct power sup-
ply is resumed.
When the battery warning light comes on, recharge the
battery as soon as you can!
16
RPM - ENGINE SPEED
This function shows engine speed in
graphic format. The numeric value can be
displayed with the RPM function of the Main
Menu.
COOLANT TEMPERATURE INDICATOR
This displays the operating temperature of
the coolant circuit.
When the temperature of the cooling circuit
rises above the permissible threshold, the
red indicator light on the instrument board
will come on; stop the vehicle and follow
the instructions provided on page 35.
Should the temperature probe not be connected, the red warning
light on the right hand side of the instrument board will flash.
ENGLISH