Malaguti XTM 50 2007 Manual page 140

HANDLEBAR CONTROLS
Left
Right
6
4
1- Horn switch
Press this switch to sound the horn.
2- Turn signal switch
To signal a right-hand turn, push the switch rightwards; push
leftwards for a left-hand turn. When released, the switch returns
to centre. To disable the turn signals, press the switch.
3- Starter (choke) lever
Operating this lever facilitates cold starting; remember to put the
choke in closed position - A - after warming up the engine (A -
closed; B - open).
4- MODE button
Press this button to select functions of the digital instrument
board.
5 (*) - Low beam/high beam light switch
SWITZERLAND version only.
This switch operates the low beam/high beam lights.
6 – ENGINE STOP switch
This switch stops the engine if emergency situations occur.
1
B
A
ENGLISH
INSTRUMENT AND CONTROL FUNCTION
CLUTCH LEVER
5(*)
2
3
The clutch lever is located on the left-hand side of the handlebar.
It engages or disengages the clutch. Pull the clutch lever to-
wards the handlebar to disengage the clutch and release it to
engage it. For smooth clutch operation, the lever must be pulled
rapidly and released slowly.
FRONT BRAKE LEVER
Front brake lever
The front brake lever is on the right-hand side of the handlebar.
To apply the front brake, pull the lever towards the handlebar.
3
17