Login To The Device; Log In Via Unlock Pattern - HIKVISION DS-7608NXI-I2/8P/4S User Manual

Connect at least four dots to draw the pattern. Each dot can be connected once only.
3) Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.
If the two patterns are different, you must set the pattern again.

Login to the Device

Log in via Unlock Pattern

admin
Only the
Please configure the pattern first before unlocking. Please refer to
Unlock Pattern for Login
1) Right click the mouse on the screen and select the menu to enter the interface.
Figure 2-2 Draw the Pattern
user has the permission to unlock the device.
.
DS-76xx-I2/xP/4S NVR UM
Chapter 2.3 Configure
28