DS-76xx-I2/xP/4S NVR UM
Figure 11-7 Alarm Input
3) Select the alarm input type to N.C or N.O.
4) Edit the alarm name.
5) Check the radio button of Input.
Chapter 11.1 Configure Arming Schedule
6) Set the arming schedule. Refer to
.
Chapter 11.2 Configure Alarm Linkage Actions
7) Set the linkage actions. Refer to
.
8) Click Apply and follow the message box to reboot device to take effect the settings.
Configure One-Key Disarming
One-key disarming enables the device to disarm an alarm input by one-key operation.
1) Go to System > Event > Normal Event > Alarm Input
2) Select the alarm input1 item from the list and click.
3) Change the alarm input type to N.C or N.O.
4) Edit the alarm name.
5) Check the Enable One-Key Disarming radio button.
96