Table of Contents
Advertisement
3) Select DynDNS under DDNS Type.
PeanutHull and NO-IP are also available under DDNS Type, and required information should be entered
accordingly.
4) Enter Server Address for DynDNS (i.e. members.dyndns.org).
5) Under Device Domain Name, enter the domain name obtained from the DynDNS website.
6) Enter the User Name and Password registered in the DynDNS website.
7) Click Apply.
Configure PPPoE
If the device is connected to the Internet through PPPoE, you need to configure the user name and
password accordingly, as follows: System > Network > TCP/IP > PPPoE.
Contact your Internet service provider for details about the PPPoE service.
Configure NTP
Purpose
Connection to a network time protocol (NTP) server can be configured on your device to ensure the
accuracy of the system date and time.
1) Go to System > Network > TCP/IP > NTP.
Figure 16-7 DDNS Settings
DS-76xx-I2/xP/4S NVR UM
126
Advertisement
Table of Contents
Troubleshooting
