Set Working Device; Manage Hot Spare System - HIKVISION DS-7608NXI-I2/8P/4S User Manual

Set Working Device

1) Go to System > Hot Spare.
2) Set the Work Mode as Normal Mode.
3) Check Enable.
4) Enter the IP address and admin password of the hot spare device.
5) Click Apply.

Manage Hot Spare System

1) Go to System > Hot Spare in hot spare device.
2) Check working devices from the device list and click Add to link the working device to the hot
spare device.
A hot spare device can connect up to 32 working devices.
Figure 17-3 Hot Spare
DS-76xx-I2/xP/4S NVR UM
132