HIKVISION DS-7608NXI-I2/8P/4S User Manual page 23

No. Name Function Description
To Turn Power On:
-
1.
-
1.
2.
3.
4.
To Turn device Off:
-
1.
2.
POWER
3.
1
ON/OFF
-If User Is Not Logged On:
1.
2.
3.
4.
5.
6.
7.
8.
9.
User name/password prompt depends on device is configuration. See "System Configuration" section.
Enable IR Remote: Press DEV button, enter device Device ID# with number keys, press Enter to pair unit with the
DEV device
2 Disable IR Remote: Press DEV button to clear Device ID#; unit will no longer be paired with the device
Switch to the corresponding channel in Live View or PTZ Control mode
Numerals
3 Input numbers in Edit mode
Delete characters before cursor.
EDIT
4 Check the checkbox and select the ON/OFF switch
Adjust focus in the PTZ Control menu
A
5 Switch on-screen keyboards (upper and lower case alphabet, symbols, and numerals)
Enter Manual Record setting menu
REC
Call a PTZ preset by using the numeric buttons in PTZ control settings
6 Turn audio on/off in Playback mode
Go to Playback mode
PLAY
7 Auto scan in the PTZ Control menu
INFO
8 Reserved
VOIP
Switches between main and spot output Zooms out the image in PTZ control mode
9
Return to Main menu (after successful login)
MENU
N/A
10 Show/hide full screen in Playback mode
Navigate between fields and menu items
Use Up/Down buttons to speed up/slow down recorded video, and Left/Right buttons to advance/rewind 30 secs in
DIRECTION Playback mode
Cycle through channels in Live View mode
Control PTZ camera movement in PTZ control mode
12
Confirm selection in any menu mode
Checks checkbox
ENTER Play or pause video in Playback mode
Advance video a single frame in single-frame Playback mode
Stop/start auto switch in auto-switch mode
PTZ
13 Enter PTZ Control mode
Go back to previous screen
ESC
14 N/A
15 RESERVED Reserved
Select all items on a list
F1 N/A
16 Switch between play and reverse play in Playback mode
PTZ Control
17 Adjust PTZ camera iris, focus, and zoom
Cycle through tab pages
18 F2 Switch between channels in Synchronous Playback mode
Table 1-2 IR Remote Functions
If User Has Not Changed the Default device Device ID# (255):
Press Power On/Off button (1).
If User Has Changed the device Device ID#:
Press DEV button.
Press Number buttons to enter user-defined Device ID#.
Press Enter button.
Press Power button to start device.
If User Is Logged On:
Hold Power On/Off button (1) down for five seconds to display the "Yes/No" verification prompt.
Use Up/Down Arrow buttons (12) to highlight desired selection.
Press Enter button (12) to accept selection.
Hold Power On/Off button (1) down for five seconds to display the user name/password prompt.
Press the Enter button (12) to display the on-screen keyboard.
Input the user name.
Press the Enter button (12) to accept input and dismiss the on-screen keyboard.
Use the Down Arrow button (12) to move to the "Password" field.
Input password (use on-screen keyboard or numeric buttons (3) for numbers).
Press the Enter button (12) to accept input and dismiss the on-screen keyboard.
Press the OK button on the screen to accept input and display the Yes/No" verification prompt (use
Up/Down Arrow buttons (12) to move between fields)
Press Enter button (12) to accept selection.
DS-76xx-I2/xP/4S NVR UM
23