Intrusion Detection - HIKVISION DS-7608NXI-I2/8P/4S User Manual

3) Drag the Sensitivity slider to set the detection sensitivity. Sensitivity range:
sensitivity. The higher the value is, the more easily the detection alarm can be
triggered.
4) Click Draw Region and set two points in the preview window to draw a virtual line.
8) Draw the maximum size/minimum size for targets. Only target the size of which is rangers from
max. size and min. size will be trigger line crossing detection.
1) Click Max. Size/Min. Size.
2) Draw an area in the preview window.
3) Click Stop Drawing.
9) Set the arming schedule. Refer to
10) Set the linkage actions. Refer to
11) Click Apply.

Intrusion Detection

Purpose
Intrusion detection function detects people, vehicle or other objects which enter and loiter in a pre-
defined virtual region, and some certain actions can be taken when the alarm is triggered.
1) Go to System > Event > Smart Event.
2) Click Intrusion.
A->B: Only the object crossing the configured line from the A side to the B
side can be detected.
B->A: Only the object crossing the configured line from the B side to the A
side can be detected.
Chapter 11.1 Configure Arming Schedule
Chapter 11.2 Configure Alarm Linkage Actions
DS-76xx-I2/xP/4S NVR UM
.
.
104