Login To The Device; Log In Via Unlock Pattern - HIKVISION BCS-V-NVRXX02-4K Series User Manual

2.4 Login to the Device

2.4.1 Log in via Unlock Pattern

 Only the admin user has the permission to unlock the device.
Step 1 Please configure the pattern first before unlocking. Please refer to Chapter 2.2 Step 2In the IP
Camera Activation text field, enter the password to activate the IP camera (s) connected to the
device.
Step 2 Optionally, check the Export GUID to export the GUID for future password resetting.
Step 3 Click OK to save the password and activate the device.
 After the device is activated, you should properly keep the password.
 When you have enabled the Export GUID, continue to export the GUID file to the USB flash
driver for the future password resetting.
 You can duplicate the password to the IP cameras that are connected with default protocol.
 Configure Unlock Pattern for Login.
Step 4 Right click the mouse on the screen and select the menu to enter the interface.
Step 5 Draw the pre-defined pattern to unlock to enter the menu operation.
Network Video Recorder User Manual
Figure 2-3 Draw the Unlock Pattern
31