3) Enter the array name.
4) Select RAID Level as RAID 0, RAID 1, RAID 5, RAID 6, or RAID 10, as required.
5) Select the physical disks that will constitute the array.
RAID Level
RAID 0
RAID 1
RAID 5
RAID 6
RAID 10
6) Click OK.
7) Optionally, the device will automatically initialize the created array. Go to Storage > RAID Setup >
Array view the information of created arrray.
Rebuild Array
Purpose
The status of array includes Functional, Degraded and Offline. To ensure the high security and reliability
Table 8-1 Create Array
Table 8-2 Required Number of HDD
Required Number of HDD
At least 2 HDDs.
At least 2 HDDs.
At least 3 HDDs.
At least 4 HDDs.
The number of HDD must be an even ranges from 4 to 16.
Figure 8-3 Array List
DS-76xx-I2/xP/4S NVR UM
70