Using The F Vsp Remote Control Handset With The Vsp 1250 R - T+A VSP 1250 R User Manual

Using the F VSP remote control handset with the VSP 1250 R

The F VSP remote control
handset controls all
functions of the VSP 1250 R.
All the settings you select
are displayed on
machine's integral display,
and on any TV
connected to the system.

Note:
If you wish to operate the VSP 1250 R directly using the F VSP remote control handset, you must first connect
the E2000 infra-red receiver to the appropriate socket on the back panel.
   
ON
This button switches the machine on and off.
AV1/2 A brief press on this button selects the analogue picture input AV1 or
AV2.
A brief press on this button selects the analogue picture input AV3 or
AV3/4
AV4.
HDMI1
These buttons are used to switch between the HDMI inputs HDMI1 ...
...
HDMI4
HDMI4
  /       Selects a menu entry.
 /    Changes a value within the menu.
   
Note:
You must activate the menu point by pressing the 
before you can change its value.
   
Within the set-up menu
Activates a menu point prior to adjustment. When the settings are
correct, this button terminates the adjustment function and accepts the
set value.
Outside the set-up menu
A brief press on this button calls up an INFOBOX on your video
monitor, displaying the current settings of the VSP 1250 R in a clear
form.
   
Within the set-up menu
Exits a menu adjustment without storing the new value. Jumps to the
next higher menu level. When in the top menu level (MAIN MENU)
closes the menu control.
Outside the set-up menu
Closes any superimposed on-screen menu or message.
   
A brief press on this button opens and closes the Setup menu of the
VSP 1250 R.
 
 
This button has the same function as the 
machine's front panel.
Note:
In Direct mode no superimposed on-screen messages (MENU etc.)
are displayed.
   
This button has the same function as the ASP button on the front
the
panel.
A brief press on this button changes the aspect ratio for the picture
output.
the
   
A brief press on this button switches the Overscan function on and off.
set
   
This button has the same function as the 
machine's front panel.
A brief press on this button switches to the next display brightness
level.
43
 button
 
 button on the  
 button on the  