Lightware VINX-110-HDMI-DEC User Manual page 72

   
9. Appendix
▪ Version number of several components including package
version has been added to the graphical user interface.
▪ It is now possible to set bandwidth limit for the encoded video
stream generated by the encoder.
▪ It is now possible to create a list of favourite channels and
associate shortcut keys to cycle through the list up and down.
Moreover, shortcut keys can be associated with specific streams.
The associated shortcut key, when pressed on a keyboard
attached to a decoder, can be used to trigger the corrsponding
action.
▪ It is now possible to connect to an encoder from a decoder or to
a decoder from an encoder by clicking on a Connect button in the
list of available devices on the Main Settings page.
Bugfix:
▪ Fixed a bug that caused VINX-HDMI-120-ENC and VINX-HDMI-110-
DEC not to be accessible via http://lwr-gatewayAABBCCDDEEFF.
local or http://lwr-clientAABBCCDDEEFF.local,
where AABBCCDDEEFF is the MAC address without colons of
the device to be accessed.
▪ Fixed a bug that caused a decoder device to display invalid
content when it was removed from a video wall.
▪ Fixed a bug that casued the VINX encoder to restart when the
corresponding decoder was reading an EDID from the attached
device that had a Video Format Preference block in its CEA
extension.
▪ Fixed a bug that caused the RS-232 symbol rate not to be
displayed correctly when a custom value was set via LW3.
▪ Cnown issue:
▪ When defining a shortcut key combination for switching to
previous or next stream or for a stream shortcut, and the shortcut
key combination has more modifier keys, the box containing the
key combination might get truncated.
▪ When an encoder is switched to Unicast mode and restarted,
it still can receive the USB stream coming from a decoder in
Multicast mode and having the same Video Stream ID.
▪ The Programmers' LW3 Terminal window might get rendered
incorrectly at certain resolutions.
▪ When dragged at certain pixel positions it is impossible to move
an item from the tile representing a video wall element on the
Video Wall Setup page.
VINX-1x0-HDMI Extenders – User's Manual
▪ Switching source or destination through the Device list pane on
the Main Settings page of the encoder or decoder might take
more time compared to switching directly by modifying the ID in
the Video stream ID box.
v1.0.0b11
Release date: 2017-12-14
respectively,
72