Before Starting The Upgrade; Firmware Upgrading Steps - Lightware VINX-110-HDMI-DEC User Manual

   
6. Firmware Upgrade

6.5.2. Before Starting the Upgrade

AAAENAIING! While the firmware is being upgraded, the normal
operation mode is suspended as the device is switched to bootload
mode. Signal processing is not performed. Do not interrupt the
firmware upgrade. If any problem occurs, reboot the device and
restart the process.
AAAENAIING!
LFP packages cannot be used with the LDU2 software.

INFO: The settings and parameters (e.g. User EDID memory) will
not be lost by upgrading the firmware.
6.5.3. Iirmware Upgrading Steps
Step 1. Connect the computer to the same network as the VINX devices
are located. Run the LDU2 software. The discovered and known
devices are being loaded.
Step 2. Select the firmware package file (*.lfp2). When the file is selected
the release note is displayed in the right window. Please read
it carefully.
Step 3. Press the Open button. The listed devices – which are
compatible with the firmware pack – are filtered automatically
in the main screen.
Step 4. Select the desired devices and press the Start Update button.
The upgrade takes about 10-12 minutes to finish which is
independent of the number of the upgraded devices since the
upgrades are processed simultaneously.
The devices are rebooted automatically when the upgrade is
finished.
VINX-1x0-HDMI Extenders – User's Manual 61