SawStop RT-TGP Owner's Manual page 36

i
The hardware for the next steps can be found in the "Wing Mounting Hardware" bag from your Power
Switch for In-Line Router Tables (RT-PSW) box.
Align the four upper mounting holes
7
in the router table (indicated by the
red arrows) with the four holes in the
intermediate cast iron wing.
Next, mount the router table to the
8
intermediate cast iron wing using the
hardware from the "Wing Mounting
Hardware" bag (4.21) from your Power
Switch (RT-PSW) box.
Insert four hex head bolts (4.13) through
four washers (4.14), then through the
intermediate cast iron wing and router
table. Secure the bolts with four more
washers (4.14), four lock washers (4.15),
and four hex nuts (4.16). Only finger
tighten the nuts at this time.
31
RT-TGP/RT-BT OWNER'S MANUAL
4.14 4.13
4.16 4.15