SawStop RT-TGP Owner's Manual page 11

Benchtop Stand for Router Table
A.
Upper Front/Rear Bracket (2)
B.
Rear Panel (1)
C.
Upper Side Bracket (2)
D. Tool Storage Plate (1)
E. Lower Side Bracket (2)
F. Front Panel (1)
G. Benchtop Stand Switch Box (1)
Stand Leg (4)
H.
Pre-installed on Switch Box:
M5 x 0.8 x 8 Pan Head Phillips Screw (2)
S.
M5 x 12 x 1 Washer (2)
T.
E
F
You will also need the following tools to complete the Benchtop Stand assembly:
•
Phillips Head Screwdriver
•
8mm Wrench (x2)
See Exploded View #2 on page 51 for more information.
B
C
D
HARDWARE PACK
•
10mm Wrench
•
5mm Hex Wrench
Hardware Pack:
I. M6 x 1.0 Hex Nut (38)
M6 x 16 x 2 Washer (42)
J.
Support Foot (4)
K.
M6 x 1.0 x 20 Pan Head Phillips Screw (4)
L.
M. M6 x 1.0 x 15 Carriage Head Bolt (34)
M4 x 0.7 x 20 Pan Head Phillips Screw (2)
N.
O. M4 x 0.7 Hex Nut (2)
Handle Mounting Bracket (1)
P.
Q. M6 Lock Washer (4)
M6 x 1.0 x 16 Socket Head Cap Screw (4)
R.
A
RT-TGP/RT-BT OWNER'S MANUAL
H
S
T
G
6