Noise Level - Epson LS-B Series Safety And Installation

■ Use an earth leakage breaker on the AC power cable of the Controller
to avoid electric shock and circuit breakdown caused by short circuit.
Prepare the earth leakage breaker that pertains the Controller you are
using.
WARNING
For details, refer to the Controller manual.
When cleaning the Manipulator, do not rub it strongly with alcohol or
benzene.
It may lose luster on the coated face.
CAUTION

2.4.3 Noise level

Noise level by movement of manipulator.
LS-B series manipulators: LAeq = 70 dB (A) or less
Operating conditions
Rated load, 4-joints simultaneous motion, maximum speed, maximum
acceleration, and duty 50%.
Measurement point
Rear of the Manipulator, 1000 mm apart from the motion range, 50 mm above
the base-installed surface.
Safety and Installation (RC90-B / EPSON RC+ 7.0) Rev.4
2. Installation
53