Command Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Parameters
enable: Enables Rambus Dynamic Random Access Memory (RDRAM) of the device.
disable: Disables RDRAM of the device.
Description
Use the rdram enable command to enable RDRAM of the device.
Use the rdram disable command to disable RDRAM of the device.
By default, RDRAM of the device is disabled.
Examples
# Disable RDRAM of the device.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] rdram disable
3.1.21 reboot
Syntax
reboot [ slot slot-number ]
View
User view
Parameters
slot slot-number: Specifies the slot number.
Description
Use the reboot command to restart the whole system or the specified card.
Examples
# Restart the switch.
<H3C> reboot
System is checking configuration now. Please wait ...
This command will reboot the system. The current configuration has not been
saved and will be lost if you continue. Continue? [Y/N]
3.1.22 schedule reboot at
Syntax
schedule reboot at hh:mm [ yyyy/mm/dd ]
Chapter 3 Device Management Commands
3-15