H3C S7500 Series Command Manual page 4

Command Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
clock summer-time zone-name repeating { start-time start-date end-time end-date |
start-time start-year start-month start-week start-day end-time end-year end-month
end-week end-day } offset-time
undo clock summer-time
View
User view
Parameters
zone-name: Name of the daylight saving time, 1 to 32 characters long.
one-off: Sets the daylight saving time for only one year (the specified year).
repeating: Sets the daylight saving time for every year starting from the specified year.
start-time start-date: Start time and start date of the daylight saving time, in the form of
HH:MM:SS YYYY/MM/DD.
end-time end-date: End time and end date of the daylight saving time, in the form of
HH:MM:SS YYYY/MM/DD.
start-year: Start year, in the range of 2000 to 2099.
start-month: Start month, the value of which is January, February, March, April, May,
June, July, August, September, October, November, and December.
start-week: Start week, the value of which is first, second, third, fourth, fifth, and last.
start-day: Start day, the value of which is Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday, and Saturday.
end-year: End year, which should be the same year as the start year, ranges from 2000
to 2099.
end-month: End month, the value of which is January, February, March, April, May,
June, July, August, September, October, November, and December.
end-week: End week, the value of which is first, second, third, fourth, fifth, and last.
end-day: End day, the value of which is Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday.
offset-time: Offset of the daylight saving time relative to the standard time.
Description
Use the clock summer-time command to set the name and time range of the daylight
saving time.
Use the undo clock summer-time to cancel the settings.
After the setting, you can use the display clock command to check the results. The
time of the log and debugging information adopts the local time that has been adjusted
by the time zone and daylight saving time.
Chapter 1 Basic System Configuration
1-2
and Debugging Commands